Laser Engraver
SUPERSPEED-660
The maximum printable area for this laser engraver is 800 x 450 mm, and we typically use 3mm material.
SUPERSPEED-660 Power & Speed Settings
| # | Layer | Colour | Plotting | Power | Speed | PPI |
| 1 | 0 (LAYOUT) | White/Black | Skip | 0% | 100% | 500 |
| 2 | 3MM CUTTING | Red | Vector | 50% | 5% | 500 |
| 3 | OUTLINE – SLOW | Green | Vector | 5% | 5% | 500 |
| 4 | OUTLINE – FAST | Yellow | Vector | 10% | 10% | 500 |
| 5 | RASTER – LIGHT | Blue | Raster | 10% | 80% | 500 |
| 6 | RASTER – DARK | Magenta | Raster | 20% | 80% | 500 |
| 7 | 6MM CUTTING | Cyan | Vector | 60% | 2% | 500 |
| 8 | ACRYLIC CUTTING | Orange | Vector | 60% | 3% | 500 |
Sizing Tabs for Joints
Use a 0.5mm difference in size between the positive and negative sides of the joint.
The positive side should be 0.5mm larger, but still centred with the negative cutout.
Note: These sizes work with both 3mm and 6mm plywood.
